Maintenance And Cleaning - Fagor VI-60P Mode D'emploi

interior 13/12/05
• To adjust the height of the fan, loosen
the telescopic tube height fixing (8),
adjust it to the desired height and then
tighten the fixing nut (9). (Fig.7)
5. OPERATING INSTRUCTIONS
• Before using the fan, place it on a flat,
stable surface.
• Turn the control dial (11) to "0" (Fig. 8) to
ensure the fan is in stop position, then
plug it in.
• Depending on the required fan speed,
select either 1, 2 or 3:
Speeds:
0 Off
1 Low
2 Medium
3 High
6. TILT(Fig. 9)
• In order to adjust the direction of the fan,
firstly switch it off and unplug it.
• Tilt the grille gently to the chosen
position.
• Switch the fan on again.

7. MAINTENANCE AND CLEANING

• Before cleaning the fan, turn the control
dial (11) to "0" and unplug the appliance.
• Clean the fan with a soft damp cloth.
• DO NOT SUBMERGE THE FAN IN
WATER.
• Do not use solvents or abrasive products
to clean the fan.
15:59 Página 5
8. INFORMATION FOR THE CORRECT
DISPOSAL OF ELECTRICAL AND
ELECTRONIC APPLIANCES
At the end of its working life,
the product must not be
disposed of as urban waste.
It must be taken to a special
local authority differentiated
waste collection centre or to
a dealer providing this service. Disposing of
a household appliance separately avoids
possible negative consequences for the
environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to
obtain significant savings in energy and
resources.
To remind you that you must collaborate
with a selective collection scheme, the
symbol shown appears on the product
warning you not to dispose of it in traditional
refuse containers.
For further information, contact your local
authority or the shop where you bought the
product.
6