Technical Characteristics; Important Safety Warnings - Fagor VI-60P Mode D'emploi

interior 13/12/05

1. TECHNICAL CHARACTERISTICS

Voltage/Frequency:
Power:
These appliances comply with the standards
set out in European Electromagnetic
Compatibility Directive 89/336/EEC.

2. IMPORTANT SAFETY WARNINGS

• Before using the appliance for the first
time, read this instruction manual
carefully and keep it for later reference.
• This appliance must be connected to an
installation with an earth connection.
• Before using the appliance, ensure that
the domestic mains voltage is the same
as that indicated on the appliance itself.
• On removing the packaging, check the
appliance is in perfect condition. In case
of doubt, contact the nearest Technical
Assistance Service.
• This appliance is for domestic use only.
Do not use it out of doors.
• In case of breakdown or malfunctioning,
switch off the appliance. Do not attempt
to repair it. If any repairs are necessary,
they must be done by a Technical
Assistance Service authorised by the
manufacturer. Insist on the use of original
spare parts.
• The user must not replace the cable. If it
is damaged or needs replacing, this must
only be done by a Technical Assistance
Service authorised by the manufacturer.
• The manufacturer holds no liability for
any damages arising from unsuitable or
improper use of the appliance or from
repairs carried out by non-qualified
personnel.
• This appliance must not be used in
bathrooms or showers or in damp
spaces. Do not use it in areas with a
temperature of over 40ºC.
• Do not use the appliance if the cable or
plug are damaged.
• Do not pull on the cable to remove the
plug.
15:59 Página 4
EN
230V~50Hz
VI-60P 60W
VI-120P 120W
5
• Before plugging in the appliance, press
the "0" button to ensure it is in stop
position.
• Unplug the appliance when not in use,
before cleaning or maintenance and
before moving the appliance.
• Keep the appliance out of reach of
children and disabled people.
• Do not push any objects through the
protection grille.
• Do not place the fan beside sources of
heat or on hot surfaces.
• DO NOT SUBMERGE THE APPLIANCE
IN WATER.
3. PARTS OF THE APPLIANCE (Fig. 1)
1. L-screw
2. Washer
3. Weight
4. Base
5. Screws
6. Telescopic tube
7. Screw cover
8. Telescopic tube height fixing
9. Fan fixing nut
10. Fan
11. Control dial
4. ASSEMBLY INSTRUCTIONS
Before assembling the fan, take the
different parts out of the packaging and
check that the supply cable is not damaged
and that the appliance has not received any
knocks during transport. If the appliance is
damaged, do not switch it on.
• Remove the screws (5) from the base
(4). (Fig. 2)
• Remove the L-screw (1) and the washer
(2) from the telescopic tube (6). (Fig.3)
• Lift up the screw cover (7) and screw the
telescopic tube (6) into the base (4)
using the 4 screws (5). (Fig.4)
• Place the weight (3) under the base (4)
and fix it in place with the L-screw (1)
and the washer (2). (Fig.5)
• Mount the fan (10) onto the telescopic
tube (12) and tighten the fan fixing nut
(9) to hold it in place. (Fig.6)