Novy 990030 Mode D'emploi Et D'installation page 27

INSTALLATION
Accessories
1x
Install this kit before installing the cooker hood!
The cooker hood may not be connected to the electrical mains.
Attach the lighting cables or the cables for the valve in the plug delivered.
1
Attention, earth wire (yellow/green) in the middle!
Output voltage 990030: 230 VAC
In case of low-voltage spotlights, provide a transformer yourself between the kit and the spots. In case of using LED
lighting, provide a LED driver for the LED spots yourself.
Connect a maximum 300 W of lighting!
Connect the plug with the unit. In case of lighting put the plug into contact L, in case of connection with a valve put the
2
plug into contact V .
If this kit is to be connect to the 'Touch' model (894-895-896-897-898-899), go to step 6.
3
For the other models, continue with step 4.
1x 2x
EN 27