BoomToneDJ Hyper Dream LED Mode D'emploi page 18

DMX512 Mode :
Press MENU button up to when the
button and the display will blink. Use UP and DOWN button to select
function setting.
DMX512 Address set :
Press ENTER to DMX mode when the
ENTER button and the display will blink. Use UP and DOWN button to Change the
DMX512 address. Once the address has been selected,press ENTER button to setup.
Back to the previous function without any change press MENU button.
DMX512 Address set :
Press ENTER to DMX mode when the
button and the display will blink. Use UP and DOWN button to select the
(1channel);
mode has been selected,press ENTER button to confirm.
Auto show mode :
Press MENU button up to when the
button and the display will blink. Use UP and DOWN button to select
or function setting.
Built-in lighting show select :
Press ENTER to Auto mode when the
button and the display will blink. Use UP and DOWN button to select the
(show 00)or
can select the Motor change mode,Press the UP button can select the LED color
change mode.
Auto show speed adjust :
Press ENTER to Auto mode when the
button and the display will blink. Use UP and DOWN button to select the
(Speed 000)to
Auto show flash speed adjust :
(3channels);
(show 0C)or......or
(Speed).
is shown on the display. Press ENTER
is shown on the display. Press
is shown on the display. Press ENTER
(5channels);
is shown on the display. Press ENTER
is shown on the display. Press ENTER
(show dC) etc.Press the DOWN button
is shown on the display. Press ENTER
(8channels); Once Channel
or
;
18