ninja Kitchen BL610C Série Guide D'utilisation page 4

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions . Do not use appliance for
other than intended use .
25 DO NOT fill container past the MAX
FILL or MAX LIQUID lines.
26 DO NOT operate the appliance with an
empty container.
27 DO NOT microwave container
or accessories provided with the
appliance.
28 NEVER leave the appliance
unattended while in use.
29 DO NOT blend hot liquids. Doing so
may result in pressure buildup and
steam exposure that can pose a risk of
the user being burned.
30 DO NOT process dry ingredients with
the Stacked Blade Assembly.
31 DO NOT perform grinding operations
with the Stacked Blade Assembly.
32 NEVER operate the appliance
without lids and caps in place. DO
NOT attempt to defeat the interlock
mechanism. Ensure the container
and lid are properly installed before
operation.
33 Before operation, ensure all utensils
are removed from container. Failure to
remove utensils can cause container
to shatter and potentially result in
personal injury and property damage.
6 6
ninjakitchen.com
34 Keep hands and utensils out of
container while chopping to reduce
the risk of severe personal injury or
damage to the blender/food chopper.
A scraper may be used ONLY when
the blender or processor is not
running.
35 DO NOT open pour spout cap while
blender is operating.
36 If you find unmixed ingredients
sticking to the sides of the pitcher,
stop the appliance, remove the lid, and
use a spatula to dislodge ingredients.
NEVER insert your hands into the
pitcher, as you may contact one of the
blades and experience a laceration.
37 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still
spinning. Allow the appliance to come
to a complete stop before removing
lids and containers.
38 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately
30 minutes before using again.
39 DO NOT expose the container and
accessories to extreme temperature
changes. They may experience damage.
40 Upon completion of processing,
ensure the blade assembly is removed
BEFORE emptying container's
contents. Remove the blade assembly
by carefully grasping the top of the
shaft and lifting it from the container.
Failure to remove the blade assembly
before emptying the container results
in a risk of laceration.
41 If using the pour spout, hold the cover
in place on the container or ensure lid
lock is engaged when pouring to avoid
risk of injury.
42 The maximum wattage rating for this
appliance is based on the configuration
of the Stacked Blade Assembly and
the pitcher.
43 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
44 DO NOT attempt to sharpen blades.
45 Turn off the appliance and unplug the
motor base before cleaning.
SAVE THESE INSTRUCTIONS
7 7
ninjakitchen.com ninjakitchen.com