ninja Kitchen Ninja Chef CT815C Mode D'emploi

MANUAL MODE
Turn the dial from 1 to 10 for total control of blending speed. Press
OTHER MODES
CLEAN
• Pitcher: To run the self-cleaning program with the pitcher, first add warm water to the MAX CLEAN
line and two drops of dishwashing soap to the pitcher. Secure pitcher lid and lid cap in place. Select
CLEAN mode, then press to begin. The unit will shut down when the self-cleaning cycle is complete.
Make sure to thoroughly rinse and air-dry the pitcher.
• Cup: When using CLEAN mode for the blender cup, fill the cup halfway with warm water and add one
drop of dishwashing soap. Secure the Pro Extractor Blades™ Assembly to the blender cup, then install cup
onto motor base. Select CLEAN mode, then press
cleaning cycle is complete. Make sure to thoroughly rinse and air-dry the cup.
TIMER+
Use TIMER+ mode to set a countdown timer. Select TIMER+ and add blend time in 10-second intervals by
repeatedly pressing the TIMER+ button. Set the speed by rotating the dial to the desired setting. Press
to activate the unit. Blending will stop automatically when countdown is complete.
PULSE
Select PULSE and turn dial to desired speed. Press the
blend only while button is pressed.
CLEANING
Dishwasher: All attachments are dishwasher safe.
It is recommended that the tamper, lid, and cap be
placed on the top rack of the dishwasher. Exercise
care when washing Pro-Extractor Blades Assembly
and pitcher, as the blade assemblies are sharp.
WARNING: Handle the Pro Extractor Blades Assembly and the pitcher's bottom blades
with care as they are sharp. Contact with the blades' edges can result in laceration.
QUESTIONS? We're here to help. Call 1-877-646-5288 or visit ninjakitchen.com
to begin and end blending.
to begin. The unit will shut down when the self-
button in short bursts to pulse. The unit will
Hand-washing: Wash pitcher in warm, soapy
water using a dishwashing utensil with a handle to
avoid direct contact with the blades. Exercise care
when washing the Pro Extractor Blades Assembly
and pitcher, as the blade assemblies are sharp.
Thoroughly rinse and air-dry all parts.
Please make sure to read the enclosed Ninja® Owner's Guide prior to using your unit.
QUICK
ASSEMBLY
PITCHER
PITCHER PITCHER LID
MAX
1. 2.
Lower pitcher Add ingredients to pitcher,
onto motor making sure not to exceed
base, then rotate Max Liquid line. Hot ingredients
clockwise until it cannot exceed the Max Hot
Liquid line.
clicks into place.
WARNING: Pitcher's bottom blades are sharp. Contact with the blades can result in laceration.
BLENDING
Press the power button. The base
defaults to Auto-iQ™ Mode. Select
the desired program and press
, or press MANUAL to switch
modes and use the dial to select
blending speed.
QUESTIONS? We're here to help. Call 1-877-646-5288 or visit ninjakitchen.com
PARTS
LID CAP TAMPER
ASSEMBLY
MAX
HOT
3.
Place lid onto pitcher,
then press down firmly,
making sure that both
side clips on lid fully
snap onto lip of pitcher.
IN USE
TAMPER
If unmixed ingredients are
sticking to the pitcher, remove
lid cap and use tamper to push
ingredients closer to the blades.
CT815C
4.
Insert lid cap
into lid and
turn clockwise
to lock.