Assembling Of The Pump Kit Ps - Efco AT 900 Manuel D'utilisation Et D'entretien

A
After opening the box that contains the kit of the pump PS, to identify the various
parts that compose it, refer to the table at page 34 and to the list of components at
page 35.
R
E
Figure 1 Assembling of the pump PS
SSEMBLING OF THE PUMP KIT
F
R
1
Assemble the components of the kit as
follows:
 Connect the hose "T" F (table 196 pos. 10)
on the connection R of the pump. Fix the
hose F with the clamp (table 196 pos.
24).
 Connect the hose E (table 196 pos.14)
to the connection R1 of the pump and fix it
with the clamping ring.
Read the instructions on the next page to
continue with the installation of the pump on
the mist blower.
12
PS