Scope Of Delivery; Preparation; Inserting/Removing The Battery - Zeiss Victory Mode D'emploi

Instructions for use

Scope of delivery

Laser range finder
Eyepiece cap
Pouch
Carry cord
3V type CR 2 lithium battery
Optics cleaning cloth
Instructions, guarantee card

Preparation

Inserting/Removing the battery

The laser range finder is powered by a type CR 2 lithium battery.
To insert and replace the battery, unscrew the battery cover (Fig. 2/7) – using
a coin or similar – by turning anticlockwise. Insert the battery with the
negative end forward (according to the symbol in the battery compartment).
Then screw the battery cover back on by turning clockwise.
At 20 °C, a new battery will last for over 2,000 measurements.
18
Depending on the conditions of use, however,
low temperatures or frequent use of the scan
mode for example may result in the battery
life being considerably shorter.
A low battery is indicated by the display
flashing.
If the equipment will be unused for a long
period, remove the battery in order to prevent
damage by leakage from the battery. Use only
high quality brand batteries.