Installing Batteries; Turning On The Device - Garmin A03595 Manuel De Demarrage Rapide

BACK Select to cancel data entry or return
to the previous menu or page.
MARK Select to mark your current location.
DOG Select to view the dog tracking page.
Select to view or scroll through
options and to move the map pointer.

Installing Batteries

The handheld device operates on two AA
batteries (not included). Use NiMH or
lithium batteries for best results.
1
Turn the D-ring counter-clockwise, and
pull up to remove the cover.
2
Insert two AA batteries, observing
polarity.
3
Replace the battery cover, and turn the
D-ring clockwise.
4
Hold .
5
Select Setup > System > Battery
Type.
Quick Start Manual
6
Select Alkaline, Lithium, or
Rechargeable NiMH.

Turning On the Device

• On the handheld device, hold the
power key until the LCD display turns
on.
Acquiring Satellite Signals
Both the collar and handheld device must
acquire satellite signals before you put the
collar on your dog. Acquiring satellites can
take a few minutes.
1
Go outdoors to an open area.
2
Turn on both devices (page 3).
3
Select the power key on the handheld
device.
shows the GPS signal strength.
When the collar has acquired satellite
signals, the status LED flashes a double-
blink or triple-blink in green.
Adding a Dog to the A03595 Handheld
The handheld device can track up to 20
dogs with dog collar devices. If you
purchase additional dog collar devices,
you can add them to the handheld device.
1
Bring your dog collar device within
range of the handheld device.
3