Before Use - Trebs 99274 Mode D'emploi

BEFORE USE

The 99274 Slow Juicer is packed almost completely assembled. Before the first use we advise
you to disassemble the device and clean all removable parts with lukewarm water and a mild
liquid detergent. Clean thoroughly with water and let the parts air-dry. This will remove traces
of dust or fabricate and transport residues. Never immerse the motor base of the slow juicer in
water or other liquids.
ASSEMBLAGE
1. Place the bowl onto the base
- Make sure the bowl fits completely
on the axis of the base
- Turn the bowl to secure it.
2. Place the strainer and spinning
brush into the bowl
- Be sure to align the red dot on top
of the strainer and the red dot on
top of the bowl.
3. Place the squeezing screw inside
the strainer and rotate until it falls
into place
4. Assemble the hopper onto the
bowl.
- be sure to align the arrow on the
hopper to the red dot on top of the
strainer and bowl