Table Des Matières - GreenWorks STF309 Manuel De L'utilisateur

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
2 Important safety instructions...........4
3 Symbols on the machine................... 5
4 Risk levels...........................................5
5 Service................................................ 6
6 Environmentally safe battery
disposal............................................... 6
7 Proposition 65.................................... 6
8 Installation......................................... 6
8.1 Unpack the machine.......................................... 7
8.2 Attach the edge guide........................................ 7
8.3 Attach the guard.................................................7
8.4 Assemble the shaft.............................................7
8.5 Attach the auxiliary handle................................8
8.6 Install the battery pack.......................................8
8.7 Remove the battery pack................................... 8
9 Operation........................................... 8
9.1 Start the machine............................................... 8
English
9.2 Stop the machine............................................... 8
9.3 Operation tips.................................................... 8
9.4 Cutting tips........................................................ 9
9.5 Adjust the length of the cutting line.................. 9
9.6 Adjust the length of the cutting line
manually............................................................ 9
9.7 Adjust the cutting diameter................................9
9.8 Change to the edging mode............................. 10
9.9 Adjust the length of the shaft...........................10
10 Maintenance.....................................10
10.1 General information.........................................10
10.2 Clean the machine............................................11
10.3 Replace the spool............................................. 11
10.4 Replace the cutting line....................................11
11 Transportation and storage............ 12
11.1 Store the machine............................................ 12
12 Troubleshooting............................... 12
13 Technical data.................................. 13
14 Limited warranty............................ 13
15 Replacement parts...........................14
3
EN