AEG BSS 4807 Mode D'emploi page 68

English
68
USB port (5)
This device has been developed in line with the latest technical advances in the USB field.
The wide range of different USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full compatibility with all USB storage
devices. For this reason, in rare cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Connect a USB storage device directly into the USB port.
2. If playback does not start automatically: Press the "M" button (12) repeatedly until
"USB" is shown on the display.
3. After a few seconds, the "READ" message appears. Playback then begins. The current
title will then be shown briefly on the display. Following this, the time will briefly appear
before the backlighting of the display switches off.
For operation, please refer to the section "Description of the USB/SD controls".
NOTE:
• Always directly connect a USB storage medium to the USB port to prevent any
malfunctions.
• The USB port is not designed for charging external devices.
CAUTION:
Before removing the USB storage device, switch the device to another mode using the
"M" button (12).
SD/MMC memory card slot (6)
This device has been developed according to the latest technical advances in the field
of memory cards. Unfortunately, due to the large number of different memory cards on
the market, the device cannot guarantee full compatibility with all memory cards. For this
reason, in a few cases, there may be problems in playing back music from certain memory
cards. This is not due to a fault associated with the device itself.
1. Slide a SD or MMC memory card into the card slot with the contact facing downwards.
2. If playback does not start automatically: Press the "M" button (12) repeatedly until "SD"
is shown on the display.
3. After a few seconds, the "READ" message appears. Playback then begins. The current
title will then be shown briefly on the display. Following this, the time will briefly appear
before the backlighting of the display switches off.