Cleaning And Maintenance - X4-Life 701593 Mode D'emploi

» Cables must never be crushed, folded over, damaged by sharp
edges or subjected to any other kind of mechanical stress.
» Avoid exposing cables to excessive heat or cold.
» If the mains cable or another cable connected to the product is
damaged, it must be replaced by the manufacturer or a similarly
qualified person (e.g. a qualified electrician).
» For safety reasons always take the plug out of the socket in the
event of a thunderstorm.
» Take the plug out of the socket during installation and cleaning,
and when the product is not in use.

Cleaning and maintenance

DANGER! Always use a soft, dry and lint-free cloth to clean
the unit's exterior. If the device is extremely dirty you can
use a soft cloth, dampened with water or a mild cleaning solution
to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol,
petrol or thinners) as these could damage the controls, casing or
any markings and labels found on the device.
29