hager Tebis TX460 Manuel D'utilisation page 108

XP1_TX460_6T7269a.qxd 20/10/05 13:45 Page 104
I
Modes available
This menu allows defining the use of Thermostat and PB
Control modes and select the preferred mode.
• Select the desired operation using
button :
and
Only thermostat: only the Thermostat mode will be dis-
played. The user will have no access to the PB Control
mode button.
Only push-button: only the PB Control mode will be dis-
played. The user will have no access to the Thermostat
mode button.
Therm. + Push-butt: the user will have access to both
operation modes. Switching modes is only possible in manu-
al operation by a pressing on both buttons simultaneously.
Thermost. prefer.: the user will have access to both
operation modes. the Thermostat mode will be the preferred
one, meaning that the display will switch automatically to the
Thermostat mode after 1 minute.
PB mode prefer.: the user has access to both operation
modes. The preferred mode is PB Control Mode, meaning
that the display will switch automatically into PB Control
Mode after 1 minute.
• Press button to confirm.
When all Installation parameters are set, press button C to
return to the Installation screen.
104