SKYTRONIC 650.651 Mode D'emploi page 3

UK
The power supply allows 12Vdc units to be powered by the mains. It can supply the rated continuous
current over long periods of time and the peak current over a short period. The power supply features:
- thermal protection
- short-circuit protection
Safety Recommendations:
- Check the housing and the connection lead for damages
- For indoor use only
- Do not use the unit in humid rooms
- Do not let liquids penetrate the ventilation holes
- Do not connect devices that need higher current outputs than those specified for the unit
- Do not place the unit in warm locations (max. 30°C)
- Do not obstruct the ventilation holes or heat sink. Leave enough space around the unit to ensure
sufficient ventilation
- The heat sink becomes very hot during use. Do not touch it while in use !
- Unplug the unit from the mains prior to replacing the fuse.
Operation:
- Connect the unit to be powered to the red and black terminal
red +
black -
- The unit to be powered must not draw more current that the maximum continuous current output
of the power supply in order to prevent overload.
- Do not operate the unit at full load for longer periods of time
- Plug the power supply into a wall outlet.
- Switch the unit on via the power switch. The power LED will light.
Protection:
If one of the built-in protection circuits is activated, proceed as follows:
- Switch the power supply off
- Let the power supply cool down if it is hot
- Before you switch the power supply on again, check if the connected unit does not draw too much
current or is faulty.
- Check the fuse when the power LED does not light up
Specifications:
All models: Input voltage 230V / 50 Hz
Output voltage 13,8 Vdc
Model No. Max Current
650.651 3 Amps
650.652 5 Amps
650.654 7 Amps
650.657 10 Amps
650.660 15 Amps
650.663 20 Amps
650.667 25 Amps
650.670 40 Amps
WARNING: Do not open the case. Risk of electrical shock. Repairs should only be carried out by a
qualified technician.
The Max Current can be supplied continuously for 30 min maximum.
Peak current Weight
5 Amps 2,5 kg
7 Amps 2,8 kg
9 Amps 3,0 kg
12 Amps 3,5 kg
17 Amps 4,9 kg
22 Amps 8,0 kg
27 Amps 10,0 kg
42 Amps 18,0 kg