Ama Systems AMA2 Mode D'emploi page 27

3.3. PROTECTION AGAINST KEY THEFT
The AMA2/3 offers also protection against key theft. You need to press the push button every time you
switch "ON" the ignition. If not, the AMA2/3 will send a SMS message. This function is not activated,
for activation see 2.3.2. and choose value 4 (Fxxxx2=4).
If the pre-alarm state is not canceled the AMA2/3 will send a message with the following information to
your cell phone :
AMA2/3 REV 4.30
KEY ALARM
CONTACT: OFF
BAT=OK SIG=4
GPS=0/1 AMA3
TIME:201446 AMA3
DATE:010707 AMA3
50:55:34 N AMA3
005:26:31 E AMA3
SPEED:0.00 AMA3
OUTPUT OFF/ON
3.4. VERIFYING THE AMA2/3'S STATUS
You can ask your AMA2/3 for information anytime and anywhere.
Send the following message to the AMA2/3: STATUS
The AMA2/3 will send you the following SMS:
AMA2/3 REV 4.30
PROG= 0,2,7,2,3
CONTACT: OFF
BAT=OK SIG=4
GPS=0/1 AMA3
TIME:201446 AMA3
DATE:010707 AMA3
50:55:34 N AMA3
005:26:31 E AMA3
SPEED:0.00 AMA3
OUTPUT OFF/ON
AMA2/3: device type
REV 4.30: software revision
PROG= 0,2,7,2,3: programming values (Function 1,2,3,4,5)
CONTACT: ON: position of the ignition key
BAT= OK: charge level of the vehicle battery (< 10,6 V = LOW)
SIG= 5: strength of the GSM signal
GPS=0/1: GPS signal (fix) (1 = AMA3 has GPS signal, 0 = AMA3 has no signal)
TIME:201446: time indication of the most recent GPS-coordinates (universal time)
DATE:010707: date indication of the most recent GPS-coordinates
50:55:34 N: GPS coordinates
005:26:31 E: GPS coordinates (please enter the coordinates on www.amasystems.be)
SPEED:0.00: speed of the vehicle expressed in "knots". (1 knot = 1,85 km/h)
SERVICE OFF: service indicates the garage/service mode
OUTPUT ON: Programmed output state (if enabled!)
26