Operation And Use; Basic Settings - Auriol AFT 77 A1 Mode D'emploi

Operation and use

Basic settings

If the appliance is unable to synchronise with
the DCF signal, you can also set the time
manually .
♦ To make the basic settings, press and hold
the
(time zone setting) flashes on the time
panel 1 .
♦ Press the
to set the desired value .
NOTE
► If you are in a country in which the DCF
signal is being received, but the current
time zone is different, you can use the
time zone settings to set the temperature
station to the current time in your country .
► If you are in a country in which the local
time is one hour ahead of central Euro-
pean Time (CET) you should set the time
zone to . The temperature station is still
being controlled by the DCF signal but
will display the time as one hour ahead
of CET .
♦ Press the
entry .
time panel 1 .
♦ Press the
to set the desired value .
│ GB │ IE │ NI
■ 16
button 5 for around 3 seconds .
button 9 or the
button 5 to confirm your
(year display) flashes on the
button 9 or the
button 0
button 0
AFT 77 A1