♦
Press the
vate Alarm 2 . The
panel 1 goes out .
Switching off the alarm
The alarm signal will sound at the set time for
around 2 minutes .
♦
Press any button with the exception of the
button 8 to switch the alarm signal off .
You do not have to reactivate the alarm func-
tion . The alarm signal will automatically sound
again at the set time on the next day .
Snooze function
♦
While the alarm is going off, press the
button 8 to activate the snooze function .
The alarm signal is interrupted for around
5 minutes . The display for the snooze func-
tion ( ) and the alarm symbol(s)
flash on the display .
Displaying the maximum/minimum
temperature
Once the power supply and the connection
to the outdoor sensor have been established,
the maximum and minimum temperatures are
automatically recorded and saved by the tem-
perature station .
♦
In basic mode, press the
once . The
temperature panels, and the highest meas-
ured temperature for indoors and outdoors
is displayed .
│
GB │ IE │ NI
■
20
button 0 again to deacti-
symbol on the time
symbol is shown on both
and
button 8
AFT 77 A1