Tips And Tricks - Midland XTC 270 Guide D'utilisation

Tips and Tricks

Problem
Battery
Camera not turning on
Recording
Camera not recording
Micro SD card
Micro SD card not reading
Video Playback
Slow or choppy video
Video Downloading
Slow data transfer
Computer does not recognize camera Ensure record switch is in the record position while connected to computer.
Sound
Excessive Wind Noise
Solution
Ensure the battery pack is installed properly and fully charged.
Make sure the switch is pushed all the way forward. If the record LED does not come on, turn
off the device and reinstall the battery.
Verify available memory.
Ensure the Micro SD card is inserted properly.
Plug camera into the computer to verify it has available storage.
Attempt formatting process.
Verify the camera is plugged into a USB 2.0 device.
Remove other unused USB devices.
Transfer video to computer before viewing.
Make sure the media player you are using is updated and your computer respects the mi-
nimum requirements.
Verify the camera is plugged into a USB 2.0 device. If registering as 1.1, unplug and the
re-plug the device.
Remove other unused USB devices.
Ensure the Micro SD card is inserted properly.
Micro SD card may be corrupted. Attempt formatting process.
Place piece of tape over microphone hole.
17