Troubleshooting; Technical Specifications - Buffalo Y067 Mode D'emploi

Telephone Helpline: 0845 146 2887 (United Kingdom)

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following points before calling the Helpline.
Fault
The unit is not working The unit is not switched on
The appliance starts
but does not heat up
Large amounts of
steam leaks from the
door seals
The Display panel is
blank
Water container
symbol is flashing on
the display
Water not reaching hot
plate
Security Lock symbol is
flashing on the display

Technical Specifications

Model Voltage
Y067 230V 50 Hz
Probable Cause
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Water container not properly
inserted
The door is not properly closed
The door lock is broken
Cooking information has not
been entered
Door is not closed properly
No water in the container
Water container is not properly
fixed in the appliance
Water dispensing tube blocked
by limescale
Door not closed properly
Power Current
1950W 8.5A
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the fuse
Check power supply
Call BUFFALO agent or qualified Technician
Check container is pushed all the way in to
the appliance
Close the door firmly
Call BUFFALO agent or qualified Technician
Enter the cooking time and temperature
Open and close the door
Remove the container and fill
Reinsert container and wait 2 minutes for the
appliance to reset
The water container symbol will dissapear
Reinsert container and wait 2 minutes for the
appliance to reset
The water container symbol will dissapear
Clean the tube with a suitable descaling
solution
If this fails to clear the blockage replace with
spare tube (supplied)
Open the door and shut it again
Max. Cooking
Capacity
Temperature
100°C 25 litres
UK
Action
Dimensions
Weight
W x H x D mm
490 x 380 x 324 18kg
4