Intended Use; Included In Delivery; Technical Data; Device Overview - brennenstuhl BrematicPRO SmartHome 1294200 Mode D'emploi

Sirène radio
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

If necessary, clean the battery and device contacts before
inserting the battery!
Remove drained batteries from the device immediately!

Intended use

The wireless siren is intended exclusively for signaling an alarm
(acoustically and optically). In the event of an alarm the siren will
emit a very loud signal tone with approx. 100 dB sound pressure. The
alarm duration is adjustable. In addition to acoustic safeguarding, an
optical alert is provided by a coloured flash. The siren is sabotage-
proof due to the installation plate with opening contact, and cannot
be removed from the wall undetected.
The device is spray water-resistant and is rated IP44.

Included in delivery

1 x Wireless siren including installation plate
3 x Battery LR 14 / C Battery 1.5 V
1 x Installation set (screws / dowels)
1 x Quick start guide
1 x Instructions for use (digital, available for download)

Technical data

Product designation:
SIR 868 01 IP44 3726
Item no.:
1294200
Radio frequency:
868.3 MHz
Frequency band:
868.1 - 868.5 MHz
Max. transmitting power: < 20 mW
Duty cycle:
< 1 % per h
Supply voltage:
3 x 1.5 V LR14 / C Battery
Power consumption:
120 mA max.
Battery life span:
approx. 2 years (typically)
Ambient temperature:
-15 °C to 50 °C
Protection type:
IP44
Sound pressure:
approx. 100 dB
Light source:
LED flash
Open area range:
approx. 100 m
Dimensions (W x H x D): 144 x 105 x 55 mm
Weight:
213 g
Subject to technical changes without notice.

Device overview

Front side

Reverse side/inside view

Installation plate
Mounting holes
Battery cover

Function

The wireless siren is part of the Brennenstuhl Home Automation System
BrematicPRO, controlled via app or the BrematicPRO PC software.
The wireless siren is paired with the Home Automation Gateway and
triggers an alarm according to conditions preset in the app. To protect
against unwanted removal, the siren is fitted with a sabotage contact
and shifts to alarm mode when it is removed from the wall.
Wireless siren 868.3 MHz
LED flash
Piezo sound
generator
Battery cover screw
3 x 1.5 V
LR14/C Battery
EN 11

Publicité

Table des Matières
loading

Table des Matières