Table des Matières
Publicité
1
2
3
3
6
1
2
English
Installation
Position the tap, escutcheon, and sealing ring on
the mounting surface.
Tighten the mounting nut.
Install the clip on the adapter.
Wrap the threads on the ¼" adapter with plumb-
ers' tape.
Install the adapter in the pipe tap.
Close the faucet supply stops.
Disconnect the cold supply hose from the stop.
The Zuvo™ filter is for cold water
only. Do not install the pipe tap on
the hot supply stop.
Install the pipe tap on the stop.
Install the supply hose on the pipe tap.
Publicité
Table des Matières
