Start-Up Sequence - Hansgrohe C 04302 0 Série Instructions De Montage / Mode D'emploi / Garantie

Table des Matières

Publicité

10
11
12
blue
bleu
azul
12
English
Open the stops.
Check all connections for leaks.
When all connections are secure, plug the filter
unit into the electrical outlet.

Start-up sequence

red
rouge
rojo
The Zuvo system will beep once, and the indicator
light will display red/green/blue as part of the test
sequence.
green
The Zuvo system will beep four times every 30 sec-
vert
verde
onds, indicating that the system must be flushed.
blue
bleu
azul
Turn the tap on. The system will beep once every
10 seconds, and the indicator light will blink
yellow/blue.
Continue flushing the system until the system stops
beeping and the indicator light is blue.
The initial flow of water may be unattractive. This
will clear with time and use.
The tap may drip for several
minutes when it is turned off. This
is normal, and is not a product
defect.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

E 04300 0 sérieS 04301 0 sérieZuvo 04303 0 série

Table des Matières