Getting Started; Installing Filters; Using The Appliance; Understanding The Air Quality Light - Philips AC2887 Mode D'emploi

Masquer les pouces Voir aussi pour AC2887:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 86

3 Getting started

Installing filters

Note
• Make sure the air purifier is unplugged
from the electrical outlet before
installing the filters.
• Make sure the side of the filter with the
tag is pointing towards you.
1
Remove all packaging materials of
the air purification filters
2
Pull the bottom part of the front
panel to remove it from the
appliance (fig.d).
3
Press the two clips down and pull
the pre-filter towards you (fig.e).
4
Put the unpacked air purification
filters back into the appliance
(fig.f).
5
Attach the pre-filter back into the
appliance (fig.g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
6
Reattach the front panel by pressig
the top part of the panel onto the
top of the air purifier (1). Then,
gently push the panel against the
body of the air purifier (2) (fig.h).
7
Wash your hands thoroughly after
installing filters.
6
EN
4 Using the
Understanding the air
quality light
Air quality light
color
Blue
Blue-violet
Red-purple
(fig.c).
Red
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.

Switching on and off

1
2
appliance
Air quality level
Good
Fair
Unhealthy
Very unhealthy
Put the plug of the appliance in the
wall outlet.
Touch
to switch on the appliance
(fig.i).
» The appliance beeps.
» The appliance operates under
the general mode by default.
» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
» For AC2887, "
the screen when the appliance
is warming up. After measuring
the particle matters in the air,
the appliance goes to auto
mode with xx displayed on the
screen (fig. j).
" displays on

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ac2882

Table des Matières