empasa 200x120 Notice De Montage Et D'utilisation page 54

Installation
Step 11:
7
Hold the drop-arm on the left and right against the
clamping awning and screw it tight with the fixing
12
bolt .
7
12
Step 12:
Hold the fully assembled clamping awning in the desired
position, align it and clamp it with the clamping feet at the
bottom between ceiling and floor.
WARNING!
Make sure it is firmly seated so that the clamping
awning cannot come loose, as there is a risk of injury if it
comes loose.
Step 13:
Loosen the screws of the drop-arms (do not unscrew them)
and push the drop-arms up or down until the desired angle
of inclination is reached,
then retighten the screws.
54
V2/2020-EM-H023