Rds - Teac MC-DX20 Manuel Du Propriétaire

How to select preset stations
1
Press the FM/AM button to select a band.
2 Press the PRESET button repeatedly until the desired
preset station is found.

RDS

The Radio Data System (RDS) is a broadcasting service which
allows stations to send additional information along with the
regular radio programme signal.
RDS works on the FM waveband in Europe only.
1
Tune in an FM RDS station (see steps
15).
The RDS indicator lights, and the Programme Service name
(station's name) appears on the display.
2 Press the RDS button.
Each time the RDS button is pressed, the RDS mode is
changed as follows:
PS (Programme Service name)
When you select PS, the frequency will be displayed for 3
seconds, and then PS (station's name) will be displayed. If
there is no PS data, "NO PS" will be displayed.
PTY (Programme Type)
When you select PTY, the programme type will be displayed.
If there is no PTY data, "NO PTY" will be displayed.
RT (Radio Text)
When you select RT, the news of stations composed of up
to 64 symbols will be displayed. If there is no RT data, "NO
RT" will be displayed.
1 3
to of page