Motor Protection; Operation Of The Switchgear - Wilo SiClean Comfort Série Notice De Montage Et De Mise En Service

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

7.5.2 Motor protection

7.5.3 Operation of the switchgear

Fig. 5: Rotary knob
Fig. 6: Information display
34
Excess current protection
The motor is protected by a protection switch with thermal and elec-
tromagnetic tripping. The trip current must be adjusted directly on
these breaker.
Pump failures lead directly to stopping the command for the pump
and generate a collective fault signal (SSM). After rectification of the
fault's cause, an acknowledgement is requested before restarting the
pump.
All motor protection functions are active in the hand mode.
Operating devices
• Main switch On/Off (lockable in position "off")
• The LC-display shows the status of the pump, the valves and the con-
troller. Using the rotary knob one can select menus and enter param-
eters. To change values and to scroll through menus the rotary knob
(Fig. 5) has to be turned and it has to be pressed in order to select and
to acknowledge.
The display of information occurs as follows (Fig. 6):
Pos.
Description
1
Pump and valve state or menu number
2
Value
3
Unit of the value
4
Standard symbols
5
Graphic symbols
WILO SE 03/2018

Publicité

Table des Matières
loading

Table des Matières