Ceado SL98 Manuel D'utilisation page 19

GB
Automatic model SL98
- Place the fruit half centered over the reamer and lower the splash cover until the cone comes
in contact with the fruit.
- Apply downward pressure to the splash cover handle. The motor will start automatically.
- Ream the fruit until all the juice is removed, then raise the cover and remove the fruit. Repeat
the process with the remaining fruit halves.
Automatic model SL98
Semi-automatic model S98
Note: When placing fruit onto the reamer, make sure your hand touches only the fruit and does not
come in contact with the reamer.
- Place the fruit half inside the splash guard centered over the reamer and apply downward
pressure to force the fruit onto the reamer.
- Ream the fruit until all the juice is removed. Then remove the fruit and repeat the process with
the remaining fruit halves.
IMPORTANT: The amount of juice and percentage of pulp and juice in the juicer depend on
variables like temperature, freshness and type of fruit. These variables may result
in different outputs which do not depend on the technical features of the juicer.
5
When all fruit halves are reamed, push the power switch to the OFF position.
19
Semi-automatic
model S98
Fig. 4