Installation Instructions; Unpacking; Positioning The Appliance - Important Considerations - Krushr F86/300 Manuel D'installation

UK/FR

Installation Instructions

Unpacking

IMPORTANT - Provisions for lifting and carrying should be made as this
product weights over 18kg (40 lbs)
Remove the appliance from its packaging.
Positioning the appliance – Important Considerations
Leg Adjustment
Prior to installation ensure that you have the appropriate size under-counter
space. Please see "Product Dimensions and Clearances" on page 5 for further
details.
Slide the appliance next to the designated under-counter space and measure the
distance that the legs will need to be adjusted in order to elevate the appliance to
the correct height for your worktop/counter.
To reduce or increase the leg height, simply loosen and spin the leg. Adjust the
legs to just short of the proposed height so that the appliance will slot into the
allocated space easily. You might want to consider using a lever under the
appliance to lift it up, or a G-clamp to hold the top of the appliance under the
worktop/carcass. Plug the appliance into the electrical socket (switched on) and
slide it into the space.
Door allowance
MOST IMPORTANT - When positioning the appliance into the space it is
imperative to make appropriate allowance for the thickness of the door. The front
fascia of the appliance must not be set too far back. Any gap between the front
fascia of the appliance and the closed door will prevent the safety micro switches
from connecting preventing operation of the appliance. Ensure the appliance is set
far enough forward within the under-counter space so that the door shuts tight
against the appliance front fascia and also flush with any surrounding cabinetry.
9