Bushnell PRIME SP164850B Mode D'emploi page 2

Thank you for purchasing your new Bushnell® Prime™ Spotting Scope.
This manual will help you optimize your viewing experience by explaining how to utilize the scope's controls and features,
and how to care for it. Read the instructions carefully before using your scope.
B
A
TRIPOD MOUNTING
After setting up your tripod (the provided tabletop unit, or any tripod you prefer) on a stable, level surface, fasten the scope's
mounting base to the screw on the tripod's platform, so that the scope is held securely in place. See "USING THE TRIPOD/
CAR WINDOW MOUNT", next page. The tripod mounting base can be rotated by loosening the small "B" logo knob on one
side, above the mount (see photo above).
USING THE ZOOM EYEPIECE AND FOCUSING
Rotate the zoom ring (B) on the eyepiece to change magnifying power from low to high. Lower power settings will provide
a brighter image with a wider fi eld of view; higher powers allow observing smaller details on more distant subjects. Turn the
focus knob (C) in either direction until your subject appears as sharp as possible. To reduce the need to readjust focus when
zooming, set the zoom to its highest power and focus on your subject. When you zoom back down to lower powers, it will
stay in focus. Note: the zoom eyepiece is not interchangeable. Do not attempt to remove it from the scope.
USING THE TWIST-UP EYECUP AND SLIDING SUN SHADE
If you are not wearing glasses, twist the rubber eyecup (A) counter-clockwise to extend it. If you experience glare or lens fl are
due to the angle and direction of the sun relative to the front lens, pull the sun shade (F) out to extend it.
(A)
2
NEVER LOOK DIRECTLY AT THE SUN WITH YOUR SPOTTING SCOPE,
AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES
D
PARTS GUIDE
Twist-Up Eyecup
Zoom Ring
Focus Knob
Eyecup Extended
C
A Tripod Mounting Base *
B Objective Lens
C Sliding Sunshade
* with rotating ring
(F)
Sun Shade Extended
ENGLISH
F
E
D
E
F