Compiling An Individual Title Sequence - IMG STAGELINE CD-113 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
6.7 Muting the sound
GB
To mute the sound of a title during replay, press
the button MUTE (22). To reactivate the sound,
press the button MUTE once again.
6.8 Compiling an individual
title sequence
For replaying a selection of titles in a certain
order, a sequence of up to 64 titles can be pro-
grammed (for standard audio CDs a maximum of
20 titles). For this purpose, in case of MP3 files,
the arrangement of the folders should be known
to you as it will be necessary to enter the corre-
sponding number of the folder for each title to be
programmed.
1) Set the CD player to the stop mode; press the
button STOP (10), if required.
2) Activate the programming mode with the but-
ton PROG (8). Press all other buttons within
15 seconds otherwise you will exit the pro-
gramming mode. In this case, press the but-
ton PROG once again. The display will show:
— for a CD without MP3 files
PROGRAM
CD P – 01
00
— for MP3 files
PROGRAM
P – 01
000
0000
3) For CDs without MP3 files, skip this step and
directly proceed with step 4.
For MP3 files, first select the number of the
folder containing the first title desired for the
title sequence. This is also necessary when
all the titles are in the root directory without
folder. In this case, enter 1 as the folder num-
ber.
Select the folder number with the buttons
REV – SKIP – CUE (9). To memorize, press
the button PROG. The four zeroes will flash
as a prompt to enter the title number.
10
4) Select the number of the first title of the title
sequence with the buttons REV – SKIP – CUE
(9). For MP3 files in folders, please note that
these files are not arranged consecutively but
that the first file in each folder is always num-
ber 1.
5) To memorize press the button PROG. The
display will show the next memory location
number, e. g. "P – 02".
6) Repeat steps (3), 4 and 5 for all further titles
desired until the entire title sequence has
been programmed.
7) To start the title sequence, press the button
PLAY/ PAUSE (11). The upper line of the dis-
play will show "MEM" (memory) and the title
sequence will be replayed.
8) Press the buttons REV – SKIP – CUE to
select any title of the title sequence or keep
the corresponding button pressed to activate
the fast forward / reverse function within a title.
9) To replay the title sequence several times,
press the button REPEAT (15) to activate the
function REPEAT ALL (chapter 6.5); other-
wise the title sequence will be deleted after
replaying.
7 Maintenance
Protect the player from dust, vibrations, humidity
and heat (admissible ambient temperature
range 0 – 40 °C). For cleaning only use a dry,
soft cloth; never use water or chemicals.
Note concerning sound interruptions
and reading errors
Cigarette smoke and dust will easily penetrate
through all openings of the unit and will also set-
tle on the optics of the laser sampling systems. If
this deposit should cause reading errors and
sound interruptions, the unit must be cleaned by
skilled personnel. Please note that there will be
a charge on cleaning, even during the warranty
period!
All rights reserved by MONACOR
manual may be reproduced in any form or by any means for any commercial use.
8 Specifications
Frequency range: . . . . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . . < 0.1 %
Channel separation: . . . . > 60 dB
Dynamic range: . . . . . . . . > 96 dB
S/N ratio: . . . . . . . . . . . . . > 70 dB
Audio output: . . . . . . . . . . 1.2 V
Power supply: . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . 50 VA max.
Ambient temperature: . . . 0 – 40 °C
Dimensions (W × H × D): . 482 × 44 × 265 mm,
Weight: . . . . . . . . . . . . . . 4 kg
Subject to technical modification.
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction
1 rack space

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

21.3060

Table des Matières