Make Gas Connection - KitchenAid 720-0745A Instructions D'installation Et Guide D'utilisation Et D'entretien

9. Make sure that the push bar screw cover is separated from
the the screw plate.
10. Remove the 2 screws and washers from the side of left side
shelf. Attach side shelf push bar by aligning the screw holes
on the side shelf with the screw holes in the push bar. Insert
the screws into the push bar screw holes and then into the
side shelf and tighten. Push in the push bar screw covers on
both sides to cover the screws.
Complete Assembly
1. Replace the grill grates.
2. Place warming shelf on brackets as shown..
A
A. Warming shelf brackets
B. Warming shelf
B
Attach Cart Basket
1. Remove 2 screws on the side panel and 2 screws on the
bottom panel.
2. Attach basket to the side panel and bottom panel by using
the screws removed in step 1.

Make Gas Connection

NOTE: If grill is to be converted to Natural gas, follow instructions
in the "Gas Conversions" section.
20 lb LP Gas Fuel Tank
WARNING
Explosion Hazard
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure
gas pressure does not exceed 11" (28 cm) water
column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
LP Gas:
IMPORTANT: A 20 lb LP gas fuel tank must be purchased
separately.
IMPORTANT: The gas pressure regulator/hose assembly
supplied with the grill must be used. Replacement gas pressure
regulator/hose assembly specific to your model, is available from
your outdoor grill dealer.
Door Style Tank Tray
1. Open cabinet doors.
2. Slide the tank tray locking bracket counterclockwise 90° and
pull out the tray.
A
A. Tank tray locking bracket
17