ENGLISH
8
You can stop the toasting process and pop the bread up at any time by pressing the STOP
button on top of the toaster (fig. 9).
To remove smaller items, you can move the toasting lever upwards a little further (fig. 10).
If bread gets stuck inside the toaster, remove the plug from the wall socket, let the appliance
cool down completely and carefully remove the bread from the toaster. Do not use a knife
or another sharp metal tool to do this and do not touch the metal internal parts of the
toaster.
Toasting frozen bread
1
Select the 8 mode by pressing the mode button (fig. 11).
Depending on the previously selected mode, you have to press the mode button once or several
times.
2
Select the desired browning setting and push the toasting lever down to switch the appliance
on (see section 'Toasting bread').
Reheating toasted bread
Select the ç mode by pressing the mode button (fig. 12).
1
Depending on the previously selected mode, you have to press the mode button once or several
times.
2
Push the toasting lever down to switch the appliance on.
Note: you cannot adjust the browning setting, because this mode has a preset time for an optimal
B
result.
Toasting one side only
Ideal for toasting bagels and baguettes.
1
Half the bagel or baguette lengthwise and shorten the baguette to a length of max. 13 cm.
2
Put the bread in the toaster with the side to be toasted facing the front of the toaster
(fig. 13).
Select the 9 mode by pressing the mode button (fig. 14).
3
Depending on the previously selected mode, you have to press the mode button once or several
times.
4
Select the desired browning setting and push the toasting lever down to switch the appliance
on (see section 'Toasting bread').
Heating up rolls and croissants
1
Push the warming rack lever down to unfold the warming rack (fig. 15).
Never put the rolls to be heated up directly on top of the toaster without having unfolded the
warming rack to avoid damaging the toaster.
2
Put the rolls or croissants on top of the warming rack.
Do not heat up more than 2 items at a time.
3
Select the 0 mode by pressing the mode button (fig. 16).
Depending on the previously selected mode, you have to press the mode button once or several
times.