Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
What do I do if the mouse does not work?
• Make sure that the polarity of the batteries is correct. The
positive (+) and negative (- ) ends of each battery must
match the positive (+) and negative (-) connections in the
battery housing.
•
Make sure the batteries are fully charged.
• Check that the receiver's USB connector is firmly
attached to the USB port on your computer.
• Verify that the device drivers are installed.
• Make sure you have established a communication link
between the mouse and its receiver. See "Setting the
Identification Code".
When I use the mouse, other wireless devices work
more slowly or fail temporarily – what should I do?
• The mouse may cause interference with any cordless,
radio-based device that operates at 27 MHz, such as a
telephone, baby monitor, or toy. To reduce interference,
move the mouse's receiver and the base unit of the
affected device as far away from each other as possible.
• You can also reset the mouse's identification code. The
mouse has 4096 identification codes that allow the
mouse and its receiver to operate without interference
from other radio frequency devices. To do this, see
"Setting the Identification Code".
Targus wireless keypad and mouse combo
12
Publicité
Table des Matières
