ARDES AR2PP1 Mode D'emploi page 9

EN
BATTERY
Lithium battery (CR2032 3V).
Please remove the isolation sheet from the battery contact
before use.
TO REPLACE BATTERY
Open battery case cover on the back of scale, if battery
case is the type shown in picture.
- Press battery gently, the battery will pop up
automatically.
- Install new battery by connecting one side of battery
to the positive plate (1) first, and then pressing down
other side.
Please observe polarity.
OPERATION
1. To make sure accuracy, place the scale on a hard, flat
floor and avoid carpet or soft surface.
Remanrk: if the scale is one of our "slim" series, make sure
to put it on hard surface such as marble, floor tile etc., and
make sure no foreign bodies beneath the scale before
weighing.
2.Gently step on the scale, then the scale will be
automatically turned on.
Stand evenly on the scale without moving and wait until
your weight shown on display is stable and locked.
9 / 28