Kenwood KTC-HR100 Mode D'emploi page 9

■ If you want to connect the Controller
Car Audio unit
Audio input
Audio output
(Left: White, Right: Red)
Power cable input
(optional accessory)
(Front side)
(Rear side)
■ If you want to connect KCA-S210A
Control unit
TO
HEAD UNIT
HD Radio tuner
HD Radio
tuner
]"N"
O N OFF ON
PROTOCOL AUX
SWITCH SWITCH
TO SLAVE UNIT
TO
H/U CHANGER 1
KCA-S210A
FM/AM antenna
Antenna cable
(Accessory6)
Controller unit (optional accessory) input
When the controller unit is connected, you cannot use
this "TO SLAVE UNIT" input terminal.
AUX
IN
TO TO
CHANGER 2
Disc changer
— 9 —
Please keep the total extension of the
control cable from the control unit to
the disc changer to 13 m or less.
Control cable lengths in excess of 13
m will cease to function properly.
• When connecting multiple units (such
as the CD Changer and KCA-S210A),
connect the KTC-HR100 directly to
the control unit.
• Set the PROTOCOL selection switch
to "N" position.