Fein ABH 18 Mode D'emploi page 18

OBJ_BUCH-0000000298-001.book Page 18 Thursday, February 8, 2018 9:02 AM
en
18
Adjusting the chisel position
(figure 8).
In this position, the operating mode selector
switch will not engage. Rotate the chisel to
the desired working position. Then, turn the
operating mode selector switch back to the
chiselling position.
Switching on and off (figure 9).
Always hold the power tool
CAUTION
firmly. Otherwise, you could
lose control over the power tool.
In case of overload, the machine switches off.
Switching on:
Press the On/Off switch. The speed increases
the more you press the On/Off switch.
Switching off:
To switch off the power tool, release the
On/Off switch.
Fig. 8
2.
2.
1.
Fig. 9
1.
2.
3.