Pièces De Rechange - Buchi V-600 Manuel D'utilisation

10 | Annexe
10.2.3
70/76
O-ring. For secondary condenser, FKM/FEP,
Ø28.2/2.6 mm
Screw caps. set. 5 pcs, GL14
Set gas ballast. Incl. gas ballast, clip, lever
Screwing set, Hose barbs and seals GL14
Content: Hose barbs bent 4 pcs, hose barbs straight 1
pc, cap nuts 4 pcs, screw caps 2 pcs, seals EPDM 3
pcs.
Set wear part for V-600, incl. membranes, hoses
and hose barbs
Content: Membrane 4 pcs, support ring 4 pcs, check
valves 4 pcs, FEP tubes, T-connector and hose barbs.
Only for Vacuum Pump V-600.
Pièces de rechange
Réfrigérants secondaires
Secondary condenser C. Cold trap, P+G-LT
Condenses remaining vapors after the vacuum pump
outlet. Application temperature: -70 to 40 °C. Used with
ice/dry ice. Content: Secondary cold trap condenser
and cap nut GL14 (1 pcs). Compatible with V-100,
V-7xx, V-300 and V-600 vacuum pumps.
Secondary condenser V. Glass condenser
Condenses remaining vapors after the vacuum pump
outlet. Used along with a recirculating chiller or tap wa-
ter. Content: Secondary V condenser, cap nut GL14 (3
pcs). Compatible with V-100, V-7xx, V-300 and V-600
vacuum pumps. Does not include holder and insulator.
Secondary condenser V. Glass condenser, incl.
Insulator, excl. Holder
Condenses remaining vapors after the vacuum pump
outlet. Used along with a recirculating chiller or tap wa-
ter. Content: Secondary V condenser, cap nut GL14 (3
pcs) and condenser insulation. Compatible with V-100,
V-7xx, V-300 and V-600 vacuum pumps. Does not in-
clude the holder.
BÜCHI Labortechnik AG
Réf. article
11057661
040624
11062527
11061921
11065180
Réf. article
047191
11059902
11063841
Manuel d'utilisation Vacuum Pump V-600
Schéma
Schéma