Pièces D'usure - Buchi V-600 Manuel D'utilisation

10 | Annexe
10.2.2
68/76
Autres accessoires
BUCHI Bluetooth® Dongle, connects instrument
to smartphone via Bluetooth®
Needed for firmware updates and eSupport.
Holder set. For V-7xx secondary condenser on
V-300 / V-600
Used to mount V-7xx secondary condenser on the Va-
cuum Pump V-300 or V-600.
Holder, set. To fix V-8xx, I-100 or Manometer on
V-300 / V-600
Used to mount Vacuum Controller V-8xx, Manometer
or Interface I-100 on the Vacuum Pump V-300 / V-600.
Content: rod and intermediate plate.
Fastening set. For VacuBox, incl. holder 2 pcs,
tube
Used to fasten VacuBox on the Vacuum Pump V-300
or V-600.
Level sensor. Incl. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of conden-
ser/secondary condenser. Placed on receiving flask.
Meant to be used with the Interface I-300 / I-300 Pro.
Membrane clamp. Incl. torx wrench TX25, TX10
To fasten and remove membranes.
Valve unit. Incl. Woulff bottle, 125 mL, P+G, hol-
der
Magnetic valve, meant to be used with the Interface
I-300/I-300 Pro. For operation with non-BUCHI vacuum
pumps or house vacuum.
Woulff bottle. 125 mL, P+G, incl. holder
For trapping particles and droplets and for pressure
equalization.
Pièces d'usure
Bagues d'étanchéité
Gasket. Flat gasket, silicone, PTFE
Seal
For cap nut GL14, EPDM seal
Seals, set. 10 pcs, for hose barbs GL14, EPDM, black
Seals, set. 10 pcs, for hose barbs GL14, FPM, green
Seals, set. 10 pcs, for hose barbs GL14, silicone, red
BÜCHI Labortechnik AG
Réf. article
11067770
11065095
11065224
11062957
11060954
11062343
11061887
11059905
Manuel d'utilisation Vacuum Pump V-600
Schéma
Réf. article
047165
038225
040029
040040
040023