Special Functions; Volume Punch-Through - Hama 179779 Mode D'emploi

4in1/8in1
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Note
• If all codes have been searched without success, the universal remote
control exits the automatic code search and automatically returns to
operating mode. The currently stored code remains unchanged.
5.4 Code recognition
Code recognition offers you the ability to determine a code you have already
saved.
5.4.1 Press the "SETUP" button until the LED lights up continuously.
5.4.2 Use the device button to select the device to be operated (e.g. TV).
If the selection is successful, the LED flashes once and then lights up
permanently.
5.4.3 Press the "SETUP" button. The LED flashes once and then lights up
permanently.
5.4.4 Press one of the number keys from 0 to 9 to search for the first digit. The
LED flashes once for the first digit of the four-digit code number.
5.4.5 Repeat step 5.4.4 for the second, third and fourth digits respectively.
5.4.6 You can then enter the determined code in the table below if you need it
again at a later time (e.g. after accidentally deleting the remote control
settings).
TV
AUX

6.Special functions

6.1 Station punch-through
With the station punch-through function, the PROG+ or PROG- commands can
bypass the currently controlled device and change the stations of a second
device. All other commands are unaffected.
To activate the station punch-through function:
• Press the desired device key (e.g. TV).
• Press and hold the "PROG+" button.
• Press the desired device key (e.g. SAT).
• Release the "PROG+" key again (the LED flashes once when the setting is
activated).
To deactivate the station punch-through function:
• Press the desired device key (e.g. TV).
• Press and hold the "PROG-" button.
• Press the desired device key (e.g. SAT).
• Release the "PROG-" key again (the LED flashes twice when the setting is
deactivated).

6.2 Volume punch-through

With the volume punch-through function, the VOL+ or VOL- commands can
bypass the device currently being controlled
and adjust the volume of a second device. All other commands are unaffected.
CODES
SOUND
AMP
SAT
CBL
DVD
DVBT
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

179780

Table des Matières