Editing A Program; Copy A Program; Chase Programming; Create A Chase - Ibiza sound LC192DMX Manuel D'utilisation

3.3.5 EDITING A PROGRAM

Scenes will need to be modified manually.
1) Press and hold the PROGRAM button until the LED blinks.
2) Use BANK UP/DOWN buttons to change Program banks if necessary
3) Select the desired fixture via the SCANNERS button.
4) Adjust and change fixture attributes using the channel faders.
5) Press the MIDI/ADD button to prepare the record
6) Select the desired SCENES button to save

3.3.6 COPY A PROGRAM

1) Press and hold the PROGRAM button until the LED blinks.
2) Use BANK UP/DOWN buttons to select the PROGRAM bank you will copy
3) Press the MIDI/ADD button to prepare the copy.
4) Use BANK UP/DOWN buttons to select the destination PROGRAM bank.
5) Press the MUSIC BANK COPY button to execute the copy. All LEDs on the controller
will blink.
All 8 scenes in a Program bank will be copied.

CHASE PROGRAMMING

A chase is created by using previously created scenes. Scenes become steps in a chase
and can be arranged in any order you choose. It is highly recommended that prior to
programming chases for the first time; you delete all chases from memory. See Delete
All Chases for instructions.

3.4.1 CREATE A CHASE

A Chase can contain 184 scenes or steps. The term steps and scenes are synonymous.
1) Press the PROGRAM button until the LED blinks.
2) Press the CHASE (1~6) button you wish to program.
3) Change BANK if necessary to locate a scene.
4) Select the SCENE to insert
5) Tap the MIDI/ADD button to store.
6) Repeat steps 3 ~ 5 to add additional steps in the chase. Up to 184 steps can be
recorded.
7) Press and hold the PROGRAM button to save the chase.

3.4.2 RUNNING A CHASE

1) Press a CHASE button then press the AUTO DEL button
2) Adjust the Chase speed by tapping the TAPSYNC DISPLAY button twice at a rate of
your choice.
©Copyright Lotronic 2014 Manual LC192DMX 9