Delete All Scenes; Running In Sound-Mode; Running In Auto-Mode; Midi Operation - Ibiza sound LC192DMX Manuel D'utilisation

3.5.4 DELETE ALL SCENES

1) Press and hold the PROGRAM button and the BANK DOWN button while turning
off power to the controller.
2) Turn the controller back on.
3.6 Playback

3.6.1 RUNNING IN SOUND-MODE

1) Press the MUSIC BANK COPY button until the MUSIC LED turns on.
2) Select the program BANK to run in sound active mode using the BANK UP/DOWN
buttons.
3) Alternatively you can press a single CHASE button (1~6) or several CHASE buttons
in sequence and all selected chases will loop in the order selected.
4) You can adjust the duration time using the FADE TIME fader.

3.6.2 RUNNING IN AUTO-MODE

1) Press the AUTO DEL button until the AUTO LED turns on.
2) If a CHASE button is not pressed the controller will automatically run a BANK
program.
3) Change BANK programs by using BANK UP/DOWN buttons.
4) Alternatively you can press a single CHASE button (1~6) or several CHASE buttons
in sequence and all selected chases will loop in the order selected.
5) You can adjust the time between steps by moving the SPEED fader and the
duration of the step by moving the FADE TIME fader.
3.6.3 BLACKOUT
The Blackout button brings all lighting output to 0 or off.

3.7 Midi Operation

The controller will only respond to MIDI commands on the MIDI channel which it is
set to full stop. All MIDI control is performed using Note on commands. All other MIDI
instructions are ignored. To stop a chase, send the blackout on note.
1. Press and hold the MIDI/ADD button for about 3 seconds.
2) Select the MIDI control channel (1~16) via the BANK UP/DOWN buttons to set.
3) Press and hold the MIDI/ADD button for 3 seconds to save settings.
4) To release MIDI control, press any other button except the BANK buttons during
step 2.
MIDI NOTE
00 to 07
08 to 15
16 to 23
©Copyright Lotronic 2014
FUNCTION (TURN ON/OFF)
Scenes 1-8 in BANK 1
Scenes 1-8 in BANK 2
Scenes 1-8 in BANK 3
Manual LC192DMX 12