Driver Installation - Speedlink Red Lightning Wheel SL-6681 Mode D'emploi

Introduction
Thank you for purchasing the Red Lightning Wheel. The wheel has been especially
developed for racing simulations for PC. Force Vibration guarantees an extremely
realistic feeling of driving - even in dicey situations!
Product features
• Analogue paddle switches
• Analogue/digital mode with LED
• Force vibration
• Directional buttons usable in digital mode as X/Y-axis
• USB connection
• Rubberised side grips
• Analogue accelerator/brake pedal
• Suckers for solid grip
System requirements
• Windows® 98/98SE/2000/ME/XP
• free USB port
• CD-ROM drive
• DirectX® 7.0 or higher
1. Connecting to a PC (Windows® 98/2000/ME/XP only)
Note:
a) Install the supplied driver first, before connecting the steering wheel
to your PC!
b) Do not connect the racing wheel to an external USB hub: it will only
work when connected directly to the USB port of your PC.
d) DirectX 7.0 or higher should be installed on your PC.

1.1 Driver installation

1. Insert the supplied driver CD in your CD ROM drive.
2. Click on „Start/Run/Browse" and select your CD ROM drive. Double
click on the file „setup.exe".
3. In the window that opens, click on "Next" and follow the instructions on
the screen.
4. The installation wizard should appear. Click on "Next" and follow the
instructions on the screen.
1.2 Connecting the racing wheel
Note:
Please note that USB operation is not supported by Windows® 95/NT.
1. When installation is finished, connect the USB cable to the USB port of
your PC.
2. Under XP: The Found New Hardware Wizard opens. Activate the checkbox
7
D
GB
F
E
I