Point List (Révision B) - Fanox SIL A Manuel D'utilisation

11.4. Point list (Révision B)
BINARY INPUT (OBJECT 1) -> Assigned to Class 0.
BINARY INPUT CHANGE (OBJECT 2) -> Assigned to Class 1.
Index Description
0 Protection active
1 Auxiliary input 1
2 Auxiliary input 2
3 Auxiliary input 3
4 Auxiliary input 4
5 Auxiliary input 5
6 Auxiliary input 6
7 Auxiliary output 1
8 Auxiliary output 2
9 Auxiliary output 3
10 Auxiliary output 4
11 Auto-recloser active
12 Teleprotection active
13 Local parameter setting
14 Trip circuit supervision
15 Start / pick-up L1
16 Start / pick-up L2
17 Start / pick-up L3
18 Start / pick-up N
19 General trip
20 Trip L1
21 Trip L2
22 Trip L3
23 General start / pick-up
24 Breaker failure
25 Trip I>>
26 Trip IN>>
27 CB 'on' by AR
28 AR blocked
29 CB close / open
30 52 Status Open Time
31 52 Status Open Failure
32 52 Status Close Failure
33 52 Status excessive openings
34 52 Status excessive sum of switched amperes
35 52 Status excessive openings per minute
36 52-A Status
37 52-B Status
38 79 Status Reclose Time
39 79 Status Open
40 79 Status Wait Time
41 79 Status Reclaim Time
42 79 Status Security Time
43 79 Status final open Time
44 Start Trip Circuit Supervision
45 50 HZ
46 Measurement Error
47 Synchronism
48 Eeprom with default values
49 Eeprom Error
50 Eeprom values changed
51 52 a Input
www.fanox.com Rev.19 296/301