Dnp 3.0 Protocole; Device Profile Document - Fanox SIL A Manuel D'utilisation

13. DNP 3.0 PROTOCOLE

11.1. Device profile document

DNP V3.00
DEVICE PROFILE DOCUMENT
This document must be accompanied by : Implementation Table and Point List.
Vendor Name:
SIL-A
Device Name:
Highest DNP Level Supported:
For Requests
For Responses
Notable objects, functions, and/or qualifiers supported in addition to the Highest DNP Levels
Supported (the complete list is described in the attached table):
For static (non-change-event) object requests, request qualifier codes 07 and 08 (limited
quantity), and 17 and 28 (index) are supported. Static object requests sent with qualifiers
07, or 08, will be responded with qualifiers 00 or 01.
16-bit, 32-bit and Floating Point Analog Change Events with Time may be requested.
Maximum Data Link Frame Size (octets):
Transmitted _____292______
Received _____292______
Maximum Data Link Re-tries:
None
Fixed at ____________________
Configurable, from _0_ to _255_
Default, 3
Requires Data Link Layer Confirmation:
 Never
 Always
 Sometimes. If 'Sometimes', when? ____________________________________________
 Configurable as Never, Only for multi-frame messages, or Always. Default Never
Requires Application Layer Confirmation:
 Never
www.fanox.com
FANOX Electronic, S.L.
Device Function:
2
2
Maximum Application Fragment Size (octets):
Transmitted ___2048___
Received
Maximum Application Layer Re-tries:
Rev.19
 Master  Slave
___2048___
None
Configurable
288/301