Sangean U2 Mode D'emploi page 7

Operating your radio AM (MW)
1. Turn on your radio by switching the Power knob to AM
position.
2. Rotate the Tuning Control to select the desired station.
On AM, the tuning scale is marked in kHz (Kilohertz).
The tuning LED will be lighted on, if the radio station
has been correctly tuned.
3. For AM operation, rotate your radio for best reception.
4. Adjust the Volume Control for comfortable listening.
5. To switch off your radio, turn the Power knob to off
position.
Low Battery LED indicator
The low battery LED indicator is lighted on when the
batteries are in need of replacement.
Earphones Jack / FM stereo reception
To operate your radio via earphones ( not included ), plug
the earphones into the earphones jack and adjust Volume
Control for comfortable listening.
Stereo is available on FM via earphones.
6