Ibiza Pro DJM10:4USB-REC Manuel D'utilisation page 3

Microphone Input
Two combination XLR and ¼" Jack sockets are mounted on the front face of the
mixer for connecting your microphones and offer both balanced or unbalanced
connections
Balanced Input Wiring:
Unbalanced Input Wiring:
Input impedance:
2k Ω
Input Sensitivity:
-54dBu (1.55mV
2) Gain controls
Each microphone has its own gain control allowing maximum control. Designed to
accommodate most microphones, both low and high impedance's to 600Ω.
Range:
3) Microphone Equalizer
Each microphone input has a 3 band EQ stage prior to Pan and Level controls. (See
Tech Specs)
EQ control 'Lo'
Allows 12dB of cut boost to the low frequencies
EQ Control 'Mid':
Allows 13dB of cut boost to the mid frequencies
EQ Control 'Hi':
Allows 12dB of cut boost to the high frequencies
©Copyright Lotronic 2011
Tip: Pin2: Positive (Hot)
Ring: Pin3: Negative (Cold)
Sleeve: Pin1: Ground (Shield)
Tip: Pin2: Positive (Hot)
Ring: Pin3: Ground (Shield))
Sleeve: Pin1: Ground (Shield)
)
<70dB to 54dB
Page 3