BOJ FP-3500 Manuel D'utilisation page 4

English
Switch Panel
1
2
3
The touch buttons are Start, Cutting for vegetable, Ice crushing, Chopping for meat, Smoothie, Pulse.
Manual mode:
Press start button then choose the related speed rotating the knob button, 7 speeds can be used from min to max, LED indication lights can show
the related speeds. Once the speed is confirmed please press start button again to start the program. Press start again to stop the program.
Auto mode:
Press start model then choose the related button of program. The LED is on means the program is selected, once the program is confirmed please
press start button again to start the program. The LED screen will show countdown time, once the program is finished, then machines will be turned
off automatically. During the working process for auto mode, you can press start to stop the program.
The operation time of each mode:
Chopping mode: 1 minute; Ice mode: 1 minute; Meat chopping mode: 30 seconds; Smoothie mode: 1 minute, all time countdown, automatic stop
to 0.
The single run time of the manual mode is 2 minutes, the time is a clockwise, and it stops automatically.
Installation
1. Position the motor base (2) on the flat and dry board.
2. Position the processing bowl (3) onto motor base, turn clockwise to make it fixed firmly.
3. Place driving shaft (4) onto the rotor inside the bowl, seat it vertically.
4. Take the blade you want. For example, when using the chopping blade (12) or dough blade (11), just seat it in driving shaft (4); When using slicing,
shredding or French Fry cutting blades, please fix it on blade disc holder (5) first, then seat the blade disc holder (5) in driving shaft (4).
Attention; only one blade can be used every time.
5. Put the food into the processing bowl (3) and then close the bowl cover (6) while using the chopping blade (12) or dough blade (11). When using
slicing, shredding or French Fry cutting blades, make sure to lock the bowl cover (6) first, ingredient should be filled through feed chute after the
machine is ready.
6. Lock the bowl cover, lock button and lid cover (6, 7, 8), the safety lock is active now.
7. Insert the power plug into the socket, then the machine is in a standby mode, press the start button, select the desired mode (automatic and
manual mode) on the panel, and then press the start button to start the operation.
Features
Note: This appliance is equipped a protective device against high temperature. If the temperature becomes too high, the unit will turn off
automatically and resume operation after the motor has cooled down sufficiently (after about 30 minutes).
Chopping blade (12)
Standard processing time is 30 sec to 1 minute, the volume per one batch refer to the following table:
Ingredient
Chocolate
Cheese
Meat
Vegetable & Spice
Fruit
Onion
10
9
8
7
6
5
4
Volume
≤200 g
≤350 g
≤800 g
100~150 g
300~500 g
≤800 g
1. Pulse
2. AUTO mode
3. Smoothie (AUTO program)
4. Chopping for meat (AUTO program)
5. Ice crushing (AUTO program)
6. Cutting for vegetables (AUTO program)
7. Working time
8. Start/Stop
9. Rotary speed control (for manual mode setting)
10. Indication light of speed
- 4 -