Using Voice Recognition (Android Smartphone Only); Using "Siri Eyes Free - Sony MEX-M72BT Mode D'emploi

Making sound and display settings
You can adjust the settings relating to sound
and display via iPhone/Android
smartphone.
For details on settings, refer to the help of
the application.
Using Voice Recognition
(Android Smartphone only)
1
Press and hold VOICE to activate
voice recognition.
2
Say the desired voice command into
the microphone.
To deactivate voice recognition
Press VOICE.
Notes
• Voice recognition may not be available in some
cases.
• Voice recognition may not work properly
depending on the performance of the connected
Android smartphone.
• Operate under conditions where noise such as
engine sound is minimized during voice
recognition.

Using "Siri Eyes Free"

"Siri Eyes Free" allows you to use an iPhone
handsfree by simply speaking into the
microphone. This function requires you to
connect an iPhone to the unit via
BLUETOOTH. Availability is limited to iPhone
4s or later. Make sure that your iPhone is
running the latest iOS version.
You must complete BLUETOOTH registration
and connection configurations for the
iPhone with the unit in advance. For details,
see "Preparing a BLUETOOTH Device"
(page 10). To select the iPhone, press MENU,
then select [BLUETOOTH]  [SET AUDIODEV]
(page 25).
22
GB
1
Activate the Siri function on the
iPhone.
For details, refer to the operating
instructions supplied with the iPhone.
2
Press and hold VOICE for more than
2 seconds.
The voice command display appears.
3
After the iPhone beeps, speak into
the microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate "Siri Eyes Free"
Press VOICE.
Notes
• The iPhone may not recognize your voice
depending on usage conditions. (For example, if
you are in a moving boat.)
• "Siri Eyes Free" may not function properly, or the
response time may lag in locations where iPhone
signals are difficult to receive.
• Depending on the iPhone's operating condition,
"Siri Eyes Free" may not function properly, or may
quit.
• If you play a track with an iPhone using the
BLUETOOTH audio connection, when the track
starts playback via BLUETOOTH, "Siri Eyes Free"
automatically quits and the unit switches to the
BLUETOOTH audio source.
• When "Siri Eyes Free" is activated during audio
playback, the unit may switch to the BLUETOOTH
audio source even if you do not specify a track to
play.
• When connecting the iPhone to the USB port, "Siri
Eyes Free" may not function properly, or may quit.
• When connecting the iPhone to the unit via USB,
do not activate Siri with the iPhone. "Siri Eyes Free"
may not function properly, or may quit.
• There is no audio sound while "Siri Eyes Free" is
activated.