Leds And Buttons - Asus PL-AC56 Kit Guide De Démarrage Rapide

LEDs and buttons

BUTTON
Clone
Pair
Reset
U11264_PL-AC56_Kit_QSG_Booklet_105x170mm.indb 4
LED STATUS
2.4G /5G Blinking
Wi-Fi rapidly
Blinking every
second
Powerline On
Off
Blinking
Ethernet On/Off
Blinking
Power On/Off
Blinking
Press and hold the button for about one second to start
cloning the parent AP's SSID and password.
Press and hold the button for about one second to start
the pairing process.
Press and hold the button for about five seconds to restore
your device to the factory default settings.
DESCRIPTION
Your PL-AC56 is cloning the parent
AP's SSID and password.
Your PL-AC56 is resetting to the
factory default settings.
The device is connected to one or
more powerline devices.
The device is not connected to any
powerline devices.
In Power-Saving mode, the power-
line LED blinks every 15 seconds.
A device is connected or not con-
nected to the Ethernet port.
The powerline adapter is transfer-
ring data via the Ethernet port.
Your device is on/off.
When switched on, the power LED
turns from red to green in about
one minute, indicating that it is
ready to use.
Blinking every second: Pairing is in
progress.
DESCRIPTION
2016-02-04 10:04:49